1 POWER RELAY - 500 USERS

With the XPL series, CDVI is launching a new generation of superheterodyne receivers. These XPL receivers will become the replacement for the standard receivers in CDVI's range. During development, a strong focus was placed on user-friendliness for the installer and the user. By adding a display in the receiver and using an intuitive menu controlled by 2 push buttons, setting up the receiver becomes super easy. Actions such as adding or deleting transmitters from the memory, setting the operating mode of the relays, copying all parameters to a portable memory...can all be selected while scrolling in the menu. For the user, the great advantage is that by using an existing transmitter in the system, a new transmitter can be added. This possibility can be applied to all transmitters or limited to 1 (master) transmitter that has this possibility. In addition, all communication is protected by the Keeloq rolling code so that malicious copying is excluded. The entire range of CDVI transmitters is compatible with this receiver. In this way you retain a great deal of freedom over the type of transmitters in your installation. This way you can easily combine handheld transmitters with wall transmitters to obtain a total installation. Modulation: AM/ASK Frequency: 433.92 Mhz Sensitivity (for good signal): -115 dBm Input impedance: 50 Ohm Power supply: 12 or 24V AC/DC Consumption (at 12V DC): from 90 mA to 86 mA (max.) Consumption (at 24V DC): from 58 mA to 190 mA Number of relays: 2 (1 NO and 1 NO/NG) Maximum applicable power: 16A - 230 VAC Memory capacity: 500 transmitters Security: Keeloq® Rolling code Max. Number of code combinations: 264 Operating temperature from -20 to +70°C Dimensions (L x W x D): 123 x 81.5 x 41.5 mm Relay operating mode: Pulse, bistable, delayed or on/off Connection of external antenna possible: SEA433